Description
The G&G ARP9 has taken the Airsoft CQB world by storm;following in the footsteps of the awesomeG&G Firehawk, but in a new 9mm format with G&G's programmable ETU and an ultra-compactGOS V5 PDW stock. The ARP9 shares the Firehawks booming muzzle report with its newly designed aggressive sound amplifier, but being capable of taking an 11.1V LiPo battery takesthe ARP9 to a new level in rate of fire, and semi-auto trigger response.
At the front end of the ARP9, we can find G&G's latest sound amplifierwhich attaches to the 14mm CCW male threads at the tip of the alloy outer barrel. The sound amp looks awesome and is positively scary when fired, but if the look doesn't suit you or you are more of a sneaky type of player, the amplifier can be easily replaced with any 14mmCCW threaded accessory, including Tracer units and suppressors. The sound amplifier sits slightly recessed beneath the short M-LOKhandguard, giving the ARP9 its"I mean business" look.
The Handguard is constructed from aluminium and is anodized in matt black, keeping the details sharp and providing a consistent finish across the piece. At the 12 o'clock position on the M-LOK handguard we have a 20mm Picatinny rail, which joins seamlessly with the rail on the receiver to provide an extended mounting point for optical sights, which is easily long enough to house a red dot sight and a magnifiershould you choose to take that route with your build.
At the 3, 6, and 9 o'clock positions we have two M-LOK slots, providing negative space attachment points for M-LOK accessories or M-LOK rail sections. The use of M-LOKensures that the ARP9 is as light as possible and that you are only carrying the accessories and rails you will use, though the handguard also adds to the ARP9's cutting edge, modernlook.
As we reach the receiver, we find familiar M4/AR15 style controls, making it easy for veteran M4 users to adapt their habits to run their ARP9 proficiently.The mock bolt release can be found in the center of the left side of the receiver, and is a separate piece for added realism, butprovides no function. The fire selector can be found above the pistol grip and is an enlarged design with deep grooves to ensure you can operate it easily, evenin poor conditions or when under pressure. Similarly to an M4/AR15 platform, the fire selector provides 3 positions; safe, semi-automatic, and fully automatic. These selector switch positions are denoted with stylish but discrete 3D bullet pictogramsand have a 90-degree throw between each mode.
The magazine release of the ARP9 is located on the bottom of the receiver, forward of the trigger guard, and is enlarged, and accessible from either side - a handy feature for left-handed users! The receiver itself follows the design aesthetic of the G&G CG series, with modern angular styling and flared magazine well for improved reload speed. The magazine well also features gripping surfaces moulded into its front face, providing an area to hold the ARP9 when shooting in unconventional positions.
The pistol grip installed on the G&G ARP9 is a G&G ergonomic slim type grip, which provides a comfortable enhanced grip option whilst remaining useful for those with smaller hands. This grip works well in conjunction with the flat-faced speed trigger and enlarged trigger guard. This combination of parts ensures you can get to your trigger quickly, and your finger will not slide off, even if you are slapping away at it to keep the enemies heads down!The trigger is also skeletonized, which is one of those small details which tie together to make the ARP9 such a looker whilstalso servingto further reduce any unnecessary weight.
At the top rear of the receiver, we can find the ambidextrous charging handle, which can be actuated from either side of the AEG, and serves to open the dust cover and retract the mock bolt carrier for access to the rotary adjuster of the HOP up unit. The HOP up unit provides adjustable backspin to your BB in order to extend the range.With the charging handle held to the rear, the HOP up can be adjusted and set for the weight of BB you are using, and with its rotary design, the unit holds its setting perfectly under the vibration of firing.
Just above the charging handle,we can find the rear flip-up aperture sight, which mates with the front flip-up sight. Both sightscomepre-installed to the 20mm Picatinny rail on the M-LOK handguard and receiver respectively, but can be removed and replaced with any 20mm Picatinny compatible optical or ironsights. The flip-up nature of this sight set allows them to be stored in a more compressed manner, preventing damage to your sights, and can also be kept on the AEG flipped down when using an optical sight, providing an emergency aiming solution should your primary optic go down.
Arriving at the rear of the AEG, we come across the G&G GOS-V5 PDW stock. This stock features alloy stock bars, allowing itto be extended to any one of two positions, depending on your body type and whether or not you use a bulky rig or plate carrier vest. The stock adjustment button can be found on the bottom of the stock, and when pressed allows the stock to extend or retract. Integrated into the GOS-V5 design, we have an ambidextrous sling loop, locatedon the bottom, which is ideally suited for use with a single-point sling.
Within the GOS-V5 stock lies the ARP9's battery compartment, which can hold up to an11.1V 1100mAh battery. For ease of installation, we recommend eitheran 11.1V 600mAh PDW batteryor purchasing the Airtech Studios Battery Extension Unit in order toinstall larger batteries. For more information on ARP9 batteries, and how to install them see our Guideon the subject.To access the battery compartment, simply remove the butt plate and stock bars by holding the adjustment lever downand pulling the butt plate off to the rear. Following this, push in the tab on the bottom of the battery tube which allows the end cap to be removed, revealing the Mini-Tamiya connector beneath.
The ARP9 takes its own proprietary G-series style AEG magazine, whichwhilstlooking skinnycan hold a whopping 300 rounds inthe wheel woundHigh-cap form! The ARP9 can also take midcap and low capacity magazines, as well as its specifically designed Drum Magazine. If you are looking for a Submachine gun style replica for up close and personal encounters, or to act as a pocket-sized LMG,you can't do much better than a G&G ARP9!
Features
- 9mm AR Pistol StyleReceiver
- Programmable MOSFET system and ETU
- Designed to handle 11.1v LiPo (up to 15c)
- Full auto can be programmed to Burst Mode
- Rotary adjustableHOPup Unit
- Removable Flash Hider
- 14mm CCW Threaded outer barrel
- Rear ambidextroussling loop
- 5'' M-LOK Handguard
- Front and Rear folding Iron Sights
- GOS-V5 Sliding Low Profile Stock
- Ergonomic Pistol Grip
- EnlargedTrigger Guard
- Flat "speed" trigger
- Extended Ambidextrous Magazine Release
Package Includes
- G&GArmamentCombat MachineARP9 AEG
- 300rnd High-capacityMagazine
- User Manual
Special Instructions
To re-programFull Auto to 3 roundBurst follow these steps:
- Remove Magazine
- Ensure the replica is cleared of any BBs
- Set the fire selector switch to semi-automatic
- Hold the trigger for 10 seconds
- You now have 3 round burst instead of Full Auto!
If you are having trouble installing a battery into the ARP9, please check out our guide on ARP9 battery installation.
Downloads
Specification
General
| Submachine Gun |
---|---|
| Yes |
| Yes, No, |
| Approx. 305fps ± 10%, using 0.20g BB |
| Yes |
| Yes |
|
|
| Starter, Regular Player, |
| Li-Po - Never Leave Charging Unattended Li-Po - Only Use Approved Chargers Li-Po - Charge in a Fire Safe Area |
Weight and Dimension
| Approx. 1.939kg |
---|---|
| 45cm |
| 59cm |
Construction
| Black, Battleship Grey, |
---|---|
| Black, Red, Blue, Silver, Purple Orchid, Green, Orange, |
| No |
| Alloy outer barrel. Aluminium handguard. Steel stock bars, pins, screws and trim parts. Polymer receiver, pistol grip, butt plate and buffer tube. |
| Polymer Alloy Aluminium Steel |
| Polymer Alloy Aluminium Steel |
Weapon Specific
| Electric |
---|---|
| None |
| ARP9, AR-9, |
| AR-9, G&G ARP9, |
| Programmable |
| Trigger Lock |
| Right Handed |
| Standard |
| 1:1 |
| 0.25g |
Hop-Up
| Yes |
---|---|
| Rotary |
| Behind mock Bolt cover, when charging handle is held to the rear. |
Furniture
|
|
---|---|
| 20mm RIS / RAS , MLOK Rail System, |
| Sliding , Multi-Position , |
| 2 Position |
| Iron Sights |
| Buffer Plate , Loop , |
Barrel
Outer Barrel Length (in) | 5'' |
---|---|
| Male |
| CCW (Counter Clockwise) |
| 14mm |
| 6.08mm |
| 128mm |
Magazine Specific
| High Capacity, AEG, |
---|---|
| Approx. 300 Rounds |
| Fill Window |
| Top |
Electric Gun Specific Information
Gearbox
| V2 Gearbox |
---|---|
| Rear Wired |
| Yes |
Motor
| 25000rpm Hi-torque Long axis |
---|
Battery Specific
| |
---|
Compatible Battery
| Li-Po |
---|---|
| Small Stick [max 1100mAh] |
| 11.1v |
Product Testing Data
| 305 FPS +/- 10% |
---|---|
| 0.2g ASG BLASTER |
| 13/7/17 |
Size guide
Joule Charts
Special Instructions
These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.
FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.
Tap the tabs below to open the relevant chart for your replica.
This table should be used for reference, and cannot be used to check one weight against another, as the weight of the BB affects the power.
In order to check if the BB can be used with your replica chronograph using the weight you wish to use and then compare it against the table.
Every time you change weights you will need to re-chrono and check against the table. This is not a conversion chart between weights.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
325 | 0.98 | 1.23 | 1.37 | 1.47 | 1.57 | 1.77 | 1.96 | 2.11 | 2.21 | 2.45 |
328 | 1.00 | 1.25 | 1.40 | 1.50 | 1.60 | 1.80 | 2.00 | 2.15 | 2.25 | 2.50 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
335 | 1.04 | 1.30 | 1.46 | 1.56 | 1.67 | 1.88 | 2.09 | 2.24 | 2.35 | 2.61 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
345 | 1.11 | 1.38 | 1.55 | 1.66 | 1.77 | 1.99 | 2.21 | 2.38 | 2.49 | 2.76 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
355 | 1.17 | 1.46 | 1.64 | 1.76 | 1.87 | 2.11 | 2.34 | 2.52 | 2.63 | 2.93 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
420 | 1.64 | 2.05 | 2.29 | 2.46 | 2.62 | 2.95 | 3.28 | 3.52 | 3.69 | 4.10 |
430 | 1.72 | 2.15 | 2.40 | 2.58 | 2.75 | 3.09 | 3.44 | 3.69 | 3.86 | 4.29 |
440 | 1.80 | 2.25 | 2.52 | 2.70 | 2.88 | 3.24 | 3.60 | 3.87 | 4.05 | 4.50 |
450 | 1.88 | 2.35 | 2.63 | 2.82 | 3.01 | 3.39 | 3.76 | 4.04 | 4.23 | 4.70 |
460 | 1.97 | 2.46 | 2.75 | 2.95 | 3.15 | 3.54 | 3.93 | 4.23 | 4.42 | 4.91 |
470 | 2.05 | 2.57 | 2.87 | 3.08 | 3.28 | 3.69 | 4.10 | 4.41 | 4.62 | 5.13 |
480 | 2.14 | 2.68 | 3.00 | 3.21 | 3.42 | 3.85 | 4.28 | 4.60 | 4.82 | 5.35 |
490 | 2.23 | 2.79 | 3.12 | 3.35 | 3.57 | 4.02 | 4.46 | 4.80 | 5.02 | 5.58 |
500 | 2.32 | 2.90 | 3.25 | 3.48 | 3.72 | 4.18 | 4.65 | 4.99 | 5.23 | 5.81 |
510 | 2.42 | 3.02 | 3.38 | 3.62 | 3.87 | 4.35 | 4.83 | 5.20 | 5.44 | 6.04 |