Frito Lay Lehigh Safety Shoes (2024)

FAQs

What is the phone number for Lehigh safety shoes? ›

We will replace all products at our discretion. If footwear was purchased directly from Rocky Brands please contact 1-800-444-4086 to obtain your return authorization number. If your boots were not purchased from either LehighSafetyShoes.com or a Rocky Brands affiliate website, this warranty is voided.

Payment for Personal Protective Equipment

With few exceptions, OSHA requires employers to pay for personal protective equipment when it is used to comply with OSHA standards.

Safety testing involves subjecting the shoes to various hazards that they may encounter in the workplace, such as impact, compression, puncture, and electrical hazards, explains Peter: “For example, shoes may be tested by dropping a heavy weight on them to simulate an impact or by applying pressure to the toe area to ...

As with any bit of personal protective equipment (PPE), shoes are a huge part of the safety kit. Hands and feet are typically among the most commonly injured body parts. Workers across a range of industries will usually be required to wear some form of protective footwear.

Safety Footwear FAQ's

The lifespan of safety footwear can vary depending on factors such as the quality of material, frequency of use, and level of maintenance. However, generally, safety footwear can last between 6 months to 2 years.

IS CODE 5852 : 2004 – Steel toe safety shoes.

Refusing to wear personal protective equipment (PPE) can have serious repercussions for both the employee and the employer. These consequences are regulated by law and can profoundly affect the work dynamic as well as the legal responsibility of each party.

Consistent therewith, Cal/OSHA has taken the stance that if an employer requires shoes for safety purposes, whether specialty or nonspecialty, the employer must pay for the cost of those shoes.

Your employer requires that the safety-toe footwear must be worn at all times regardless of the presence of a hazard; must have a leather upper; must have oil resistant and non-skid soles, and must comply with ASTM 2413-05 with a impact resistance rating of 75 and an compression resistance rating of 75.

This can vary slightly depending on the material your new safety footwear is made from. A general guideline however is that you should allow a couple weeks for wearing work boots in. This will help ensure you can wear them for prolonged periods without experiencing any pain or discomfort.

Are safety shoes an OSHA requirement? ›

The OSHA regulations pertaining to employee footwear are found at 29 CFR 1910.132 and 1910.136 (copies enclosed). In general, the standard requires that foot protection be used whenever it is necessary by reason of hazard of processes or environment which could cause foot injury.

Work (professional) and safety footwear differs from each other according to the presence of a protective cap in the toe area. Work footwear does not have a protective toecap and has the EN ISO 20347 standard. It is suitable for working environments where there is a small chance of injury due to mechanical influences.

Impenetrable midsole. Unlike the S1 and S2, S3 work shoes have an anti-perforation midsole. This prevents nails or pieces of broken glass from penetrating the sole and injuring your foot. A waterproof shaft. S3 safety shoes are highly suitable for work environments that involve wet or damp conditions.

Safety Toe shoes need to be fit about a half size larger than normal footwear. Since there is hard cap in shoe there is no stretch in toe box area. You do not want your toes touching the end of the safety shoe.

There are many reasons why steel toe boots are a must-have in hazardous working environments. They help prevent a wide range of injuries—and not just from falling tools. With that said, here are some of the protections steel toe boots provide.

The standard EN ISO 20345 defines both the basic and additional requirements for safety shoes for commercial use.

(800) 523-4448

Shoes For Crews / Customer service

To ensure the safety of employees, appropriate protective footwear must be worn by all persons when working in areas where there is a danger of foot injuries due to falling or rolling objects that could crush the foot, objects that could pierce the sole, and where the employee's feet are exposed to electrical hazards.

Employers' duties

The Personal Protective Equipment at Work Regulations 1999 also say that, if a risk has been identified and cannot be controlled any other way, then protective equipment must be provided. This includes footwear.